2016-2019 BMW 7 Series Steering Column LS6862001AI05

Also known as

Steering Shaft

Steering Column Assembly

Upper Steering Shaft

Steering Tube

Tilt Steering Column

Power Steering Column

What this part does

The steering column serves as the critical physical connection between the steering wheel and the steering rack. It transfers driver input directly to the directional wheels while housing several essential control components, including the steering angle sensor, ignition switch linkage, and the electronic tilt and telescope adjustment mechanisms. A failing steering column typically presents as excessive physical play in the steering wheel, binding or clunking sensations during turns, or complete failure of the power adjustment motors. In modern platforms, damage to the internal clock spring or steering angle sensor wiring within the column can also trigger traction control and airbag warning lights.

Fits these vehicles

OEM and interchange numbers

LS6862001AI05

Before you order

• Verify whether your original vehicle uses a power-adjustable (electronic tilt/telescopic) or manual steering column, as the assemblies and wiring harnesses are completely different.
• Depending on the modules included and left attached to the column assembly, you may need to perform a steering angle sensor calibration or initialize the electronic adjustment end-stops using a diagnostic scanner after installation.
• Ensure that your steering wheel and airbag combination matches the splines and clock spring connections of the replacement unit. Always disconnect the battery and wait at least 15 minutes before disconnecting or reconnecting any column wiring to prevent accidental airbag deployment or module damage.