2011-2014 Porsche Cayenne Front Right Headlight 7P5941032BT
Specifications
OEM number
7P5941032BT
Side
Right (passenger side)
Position
Front
Interchange numbers
1ZT0116064401160644268454SSB584VOLDOTSAEHG09
Donor year
2012
Body style
SUV
Fuel
Gas
Engine size
3.6 L
Engine type
VR6
Transmission
Automatic
Drivetrain
AWD
Suspension
Air
Trim
Basic
Donor mileage
150000
About this part
Also known as
Headlamp
Headlight Assembly
Front Right Light
Head Lamp Unit
Passenger Headlamp
Main Headlight
What this part does
The passenger side headlight assembly provides critical forward illumination for nighttime driving, signaling, and adverse weather conditions. It mounts securely to the front right corner of the core support and houses the primary low beam, high beam, turn signal, and daytime running light components. This specific housing protects the internal reflectors and projectors behind a clear polycarbonate lens designed to optimize light distribution.
When this assembly sustains impact damage, the mounting tabs commonly break, leading to a vibrating light beam or misaligned cutoff line. If the factory perimeter seal fails, moisture and condensation will inevitably build up inside the lens. This water intrusion frequently drains down to the base of the housing, where it can short out the expensive electronic control modules and ballasts that power the lighting system.
Fits these vehicles
| Make | Model | Years | Engine |
|---|---|---|---|
| Porsche | Cayenne | 2011-2014 | 3.6L V6 |
| Porsche | Cayenne | 2011-2014 | 4.8L V8 |
OEM and interchange numbers
7P5941032BT
1ZT01160644
01160644268454
SSB584
VOLDOT
SAEHG09
Before you order
It is absolutely critical to match the OEM part number 7P5941032BT to the sticker on your original housing. Porsche offered multiple lighting configurations for the Cayenne during these years, including standard Halogen, Bi-Xenon, and the Porsche Dynamic Light System (PDLS) with active cornering. These different systems use completely distinct wiring harnesses, internal motors, and control modules, meaning they cannot be swapped.
Keep in mind that used headlight housings usually do not include the HID ballasts, LED control modules, or primary bulbs unless explicitly stated. You will likely need to transfer your existing electronics and modules to this replacement housing. Once installed on the vehicle, the headlight beam must be properly leveled and aligned using the manual adjustment screws to ensure safe road visibility and prevent blinding oncoming traffic.
