2015-2018 Porsche Macan Rear Coil Spring 95B511115A
Specifications
About this part
Also known as
Rear Coil Spring
Suspension Spring
Helical Spring
Rear Suspension Spring
Coil Suspension Spring
What this part does
The rear coil spring supports the rear weight of the vehicle and absorbs impacts from road irregularities to maintain proper ride height and suspension geometry. It is positioned between the rear lower control arm and the chassis structure. When a coil spring begins to fail, it typically snaps or cracks near the bottom coil due to stress and corrosion. A compromised spring results in a noticeably sagging rear ride height, uneven tire wear, compromised handling, and the suspension bottoming out over bumps.
Fits these vehicles
| Make | Model | Years | Engine |
|---|---|---|---|
| Porsche | Macan | 2015-2018 | 3.0L |
OEM and interchange numbers
95B511115A
95B-511-115-A
Before you order
- Suspension springs should always be replaced in pairs on the same axle. Installing a single spring will usually result in an uneven ride height and unpredictable handling under load.
- Verify your vehicle's specific suspension build code. The Porsche Macan was offered with standard steel springs, steel springs with PASM, and full air suspension systems. This component is strictly for models equipped with rear steel coil suspension.
- Check the colored paint dots on your existing spring. Porsche uses specific color bands to denote spring rates tailored to the exact equipment weight of the vehicle.
- Inspect your upper and lower rubber spring isolators for wear or tearing, as they often need replacement at the same time as the spring.