1997-2000 BMW 5 Series Central Lock Switch
Specifications
Donor year
1998
Body style
Sedan
Fuel
Gas
Engine size
2.8 L
Engine code
M52
Engine type
2.8L I6
Drivetrain
RWD
About this part
Also known as
Power Lock Switch
Door Lock Switch
Central Locking Button
Master Lock Switch
Console Lock Button
What this part does
The central lock switch allows occupants to lock and unlock all vehicle doors, the trunk, and the fuel door simultaneously from inside the cabin. In the BMW E39, this component is mounted directly on the center console, positioned next to the hazard light button. It operates by sending a momentary ground signal to the vehicle's General Module (GM3), which commands the individual door actuators. When this switch fails, usually due to internal contact wear or liquid damage, you lose the ability to secure the doors from the center console and must rely on the key fob or manual door pins.
Fits these vehicles
| Make | Model | Years | Engine |
|---|---|---|---|
| BMW | 528i (E39) | 1997-2000 | 2.8L I6 |
| BMW | 540i (E39) | 1997-2003 | 4.4L V8 |
| BMW | 525i (E39) | 2001-2003 | 2.5L I6 |
| BMW | 530i (E39) | 2001-2003 | 3.0L I6 |
| BMW | M5 (E39) | 2000-2003 | 4.9L V8 |
Before you order
Because of its location on the center console, this switch is highly susceptible to damage from spilled beverages. Before installing the replacement, inspect the wiring harness connector on your vehicle for sticky residue or green copper corrosion, which must be cleaned for the new switch to function reliably. Verify that the retaining clips on your center console bezel are intact, as this switch snaps directly into the trim piece. This is a purely mechanical electrical switch and does not require programming or coding to the vehicle's modules after installation.