2016-2017 Mazda 6 Steering Wheel
Specifications
Donor year
2016
Body style
Sedan
Fuel
Gas
Engine size
2.5 L
Engine type
2.5L I-4 DI, DOHC, VVT, 184HP
Transmission
Automatic
Drivetrain
FWD
Suspension
Coil
Trim
GS
Donor mileage
220000
Paint code
41W
Donor VIN
JM1GL1V50H1100606
About this part
Also known as
Steering Wheel Assembly
Bare Steering Wheel
Driver Steering Wheel
Leather Steering Wheel
Urethane Steering Wheel
Multifunction Steering Wheel
What this part does
The steering wheel serves as the central manual control mechanism for navigating the vehicle, transmitting rotational input directly through the steering column down to the steering rack. Positioned directly in front of the driver, it acts as the central mounting point for critical safety components, including the primary driver frontal airbag and the horn contact pad. In modern vehicle architectures, the wheel framework also integrates the electronic switchgear for the multimedia system, radar cruise control, Bluetooth hands-free calling, and driver assistance systems.
Physical deterioration commonly occurs on the outer rim over time due to UV exposure, friction, and moisture, leading to a degraded grip and poor interior aesthetics. Structural failure, frame bending, or spline damage typically occurs only during a collision or severe impact. When replacing this assembly, the core structural frame must be perfectly intact to ensure correct alignment with the steering shaft splines and proper seating of the airbag module.
Fits these vehicles
| Make | Model | Years | Engine |
|---|---|---|---|
| Mazda | 6 | 2016-2017 | 2.5L |
Before you order
This component is strictly the structural frame and outer rim. The center airbag module, steering wheel control switches, internal wiring harness, and rear plastic shrouds must be transferred from your original unit. Before purchasing, verify whether the vehicle it came from was equipped with a heated rim, as the internal heating elements and electrical connectors cannot be retrofitted to a standard, non-heated wheel.
Additionally, confirm if your vehicle features rear-mounted paddle shifters. The rear mounting bosses and plastic cutouts on the wheel frame vary between standard models and those equipped with the sport package shifters. Always disconnect the vehicle battery and wait a minimum of fifteen minutes before attempting to remove the center airbag module to discharge the system and prevent accidental deployment during the replacement procedure.
