1997-2000 BMW 5 Series Front Seat Belt
Specifications
Position
Front
Donor year
1998
Body style
Sedan
Fuel
Gas
Engine size
2.8 L
Engine code
M52
Engine type
2.8L I6
Drivetrain
RWD
About this part
Also known as
Safety Belt
Seatbelt Assembly
Seat Belt Retractor
Restraint System
Seatbelt Webbing
What this part does
The Seat Belt assembly is the primary passive restraint component designed to secure occupants during sudden deceleration or collisions. It consists of the woven webbing, the sliding latch plate, and a mechanical retractor unit typically bolted to the lower B-pillar or sill area. The internal retractor contains a centrifugal inertia lock that permits free movement for occupant comfort but locks the spool instantly under hard braking, cornering, or impact. When this unit wears out or fails, the webbing may refuse to retract, leaving hazardous slack, or the mechanism may jam completely and prevent the occupant from pulling the belt across their chest.
Fits these vehicles
| Make | Model | Years | Engine |
|---|---|---|---|
| BMW | 528i (E39) | 1997-2000 | 2.8L |
| BMW | 540i (E39) | 1997-2003 | 4.4L |
| BMW | 525i (E39) | 2001-2003 | 2.5L |
| BMW | 530i (E39) | 2001-2003 | 3.0L |
| BMW | M5 (E39) | 1999-2003 | 4.9L |
Before you order
Confirm whether you need the driver (left) or passenger (right) side, as the retractor mounting brackets and payout angles are highly side-specific and cannot be swapped. This assembly typically includes the retractor and webbing; you will reuse your existing seat belt buckle receptacle attached to the seat rail. If the vehicle it came from or the receiving vehicle was involved in a collision, be aware that the mechanical pretensioner may require inspection, and any related SRS or airbag codes in the vehicle's computer will need to be cleared by a diagnostic tool after installation.
