2012-2015 BMW 3 Series Front Right Window Switch
Specifications
Side
Right (passenger side)
Position
Front
Donor year
2013
Body style
Sedan
Fuel
Gas
Engine size
2.0 L
Engine code
N20
Engine type
2.0L I4 Turbo
Drivetrain
AWD
About this part
Also known as
Passenger Window Switch
Window Control Switch
Power Window Button
Window Switch Assembly
Door Window Switch
What this part does
The Front Right Window Switch mounts directly into the passenger door armrest or trim panel on the BMW F30 chassis. It provides the physical interface to complete the electrical circuit, signaling the door module and window regulator motor to raise or lower the passenger side door glass. In modern BMW electrical architectures, this switch communicates its position back to the vehicle's body domain controller or footwell module.
When the switch fails mechanically, the button may stick, feel loose, or fail to snap back to the neutral position. Electrical failure often results in a window that will not roll down from the passenger seat but continues to operate normally when controlled by the driver's master switch.
Fits these vehicles
| Make | Model | Years | Engine |
|---|---|---|---|
| BMW | 328i xDrive (Sedan) | 2013-2016 | 2.0L |
| BMW | 328i (Sedan) | 2012-2016 | 2.0L |
| BMW | 320i / 320i xDrive (Sedan) | 2013-2018 | 2.0L |
| BMW | 328d / 328d xDrive (Sedan) | 2014-2018 | 2.0L Diesel |
| BMW | 335i / 335i xDrive (Sedan) | 2012-2015 | 3.0L |
| BMW | 340i / 340i xDrive (Sedan) | 2016-2018 | 3.0L |
| BMW | M3 (Sedan) | 2015-2018 | 3.0L |
Before you order
Remove your original switch and compare the electrical connector pins on the back before purchasing. BMW uses different pin configurations across the 3 Series range depending on the vehicle's production month, interior lighting packages, and specific door modules. Ensure the trim color and finish match your existing interior. This switch is a direct plug-and-play replacement and does not require software coding or initialization to operate. Always use a non-marring nylon trim tool to pry the switch bezel out of the door card to avoid damaging the surrounding panel materials.