2011-2014 Porsche Cayenne Front Left Brake Caliper 7PP615123

SKU: OEM0010 | Used
2011-2014 Porsche Cayenne Front Left Brake Caliper 7PP615123 photo 1 2011-2014 Porsche Cayenne Front Left Brake Caliper 7PP615123 photo 2 2011-2014 Porsche Cayenne Front Left Brake Caliper 7PP615123 photo 3 2011-2014 Porsche Cayenne Front Left Brake Caliper 7PP615123 photo 4 2011-2014 Porsche Cayenne Front Left Brake Caliper 7PP615123 photo 5 2011-2014 Porsche Cayenne Front Left Brake Caliper 7PP615123 photo 6
Seller:
OEMRECYCLER
📍 Vaughan, 8929 Weston Rd
📞 +16472851704
Specifications

Specifications

OEM number

7PP615123

Side

Left (driver side)

Position

Front

Donor year

2012

Body style

SUV

Fuel

Gas

Engine size

3.6 L

Engine type

VR6

Transmission

Automatic

Drivetrain

AWD

Suspension

Air

Trim

Basic

Donor mileage

150000

Description

About this part

Also known as

Front left brake caliper

Driver side brake caliper

Front disc brake caliper

Brake cylinder assembly

Front brake housing

What this part does

The front brake caliper is a critical hydraulic component that houses the brake pistons and brake pads. Mounted directly to the front driver side steering knuckle, it receives hydraulic pressure from the brake master cylinder and forces the pads against the brake rotor to generate the friction needed to stop the vehicle. When this component fails, the internal pistons or guide pins typically seize, or the piston seals degrade and leak brake fluid. Symptoms of a failing caliper include the vehicle pulling sharply to one side during braking, premature or uneven brake pad wear, an overheated front wheel, or a spongy brake pedal due to fluid loss.

Fits these vehicles

Make Model Years Engine
Porsche Cayenne 2011-2014 3.6L
Volkswagen Touareg 2011-2014 3.6L

OEM and interchange numbers

7PP615123

7PP.615.123

7PP-615-123

Before you order

Verify your original part number matches 7PP615123 exactly before purchasing. Porsche and Volkswagen SUVs of this generation were built with multiple brake options (PR codes) featuring different rotor sizes and piston configurations; this caliper will not fit vehicles equipped with the larger turbo or carbon-ceramic brake packages. While it is possible to replace a single caliper, it is strongly recommended to inspect the opposite side for matching wear and proper piston retraction to prevent uneven braking dynamics. A complete brake fluid bleed of the front hydraulic circuit is required after installation to eliminate trapped air and restore pedal pressure. New crush washers for the brake line banjo bolt are required and are not included with this part.

C$250.00CAD
plus GST/HST
In stock (1)
Free local delivery within 20 km
$ Pay on the spot accepted